Everything You Need to Know About Fall Protection Safety Harnesses
People who are working at heights deal with the issue of falls as the major sources of fatalities and injuries. Usually, falls take place when people work at fragile surfaces like roofs as well as ladders. Wherever you go, thousands of workers that work at heights suffer from minor to major injuries due to falls. Sadly, deaths are also becoming a common occurrence because of falls. If you know someone who works at heights or even yourself, your safety is of utmost priority.
There are different ways to ensure the safety of workers who are working at heights. Typically, fall safety measures begin with the proper inspection and planning of the job site. The use of functional and appropriate personal protective equipment is also a must. For people who are at risk of falling, the most commonly used personal protective equipment is fall protection safety harnesses. Sadly, there are still many people in the construction industry who undermine the use of construction safety harnesses. Some only give value to its importance after falling from heights and are still lucky enough to live.
Personal fall arrest systems are used for falls with construction safety harness as an important part of the system. This equipment keeps users suspended in an upright manner in case of a fall. It also keeps them supported as they wait for the right help. The use of full body safety harnesses is highly recommended in a good fall restraint system. It prevents employees from reaching areas of the job site that falls may take place. Using body belts only as construction safety harnesses is not a good call. One of the reasons why this is so is that the fall will be centered on the abdomen. With a full body harness, though, the forces will be evenly distributed throughout your body. Your benefit for this will be minimizing the occurrence of minor to major injuries for falls.
Although fall protection safety harnesses are created to provide safety from falls for workers, they may not do so if you fail to wear them right. While there are different types of safety harness, there are general guidelines that you can follow to ensure proper wearing of harnesses.
First, hold the harness through the back D-ring and shake it so that all straps will be at their rightful place. Unbuckle buckled straps on the chest, leg, and waist areas by releasing the straps. You then proceed to slip the straps over your shoulders. At this part of wearing your harness, you will notice the D-ring resting at your back just in the middle of your shoulder blades. You then pull the leg strap between your legs and connect them to the opposite end. Do the same procedure for the other leg. If your construction safety harness comes with a belt, this is the time to connect it to the waist strap.